Product compliance

CE marking and intended use

Opsero’s products are FPGA Mezzanine Cards: sub-assemblies intended for incorporation into apparatus by professional integrators. A card has no standalone function. It operates only when mounted on a compatible FMC carrier and driven by an FPGA design created by the integrator, who also chooses the enclosure, the cabling, the power supply and the firmware of the finished apparatus.

Each card is CE marked. Opsero assesses the electromagnetic compatibility of each card under reference conditions described in its EMC integration notes and issues an EU Declaration of Conformity covering the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU on that basis. The declarations are listed below, in English (the original) and French. The integrator is responsible for the conformity of the apparatus into which a card is incorporated.

Opsero’s cards are Class A equipment, intended for commercial and industrial environments. In a residential environment they may cause radio interference, in which case the user may be required to take adequate measures.

Product Part number Declaration Issued Hardware revision and serial numbers Directives Standards Emission class PDF
Ethernet FMC 1.8V OP031-1V8 DOC-OP031-1V8-20260912
EMC assessment EMCA-OP031-1V8-20260912
2026-09-12 Rev F, 310900 to 312539 2014/30/EU; 2011/65/EU as amended by (EU) 2015/863 EN 55032:2015 + A11:2020 (in part); EN 55035:2017 + A11:2020 (in part); EN IEC 63000:2018 A English
SHA-256 99e76ea6c92ed4608d59af26797acba594561fff512bd3a96098b04e471f6d6d
French
SHA-256 3eddbc5d901887aee1d2856591daa0ae77deba71c2c16b55428518581d13650a
Hardware revision and serial numbers: Rev F, 310900 to 312539
Directives: 2014/30/EU; 2011/65/EU as amended by (EU) 2015/863
Standards: EN 55032:2015 + A11:2020 (in part); EN 55035:2017 + A11:2020 (in part); EN IEC 63000:2018
Emission class: A

A product not listed above is CE marked and its EU Declaration of Conformity is being prepared on the same basis. It will appear here when issued. Contact us if you need the status for a specific product.

Material Compliance Declarations

Opsero publishes a material compliance declaration for each product listed below. Each declaration covers the EU RoHS Directive 2011/65/EU as amended by Delegated Directive (EU) 2015/863, REACH Regulation (EC) No 1907/2006 Article 33 (substances of very high concern) and Annex XVII (restrictions), and several other EU substance regulations. A declaration applies to the production builds it lists by serial number. When a declaration is reissued, the new issue is published as a new file and the earlier one stays available, unchanged, in the archive at the bottom of this page.

ProductBuilds coveredEU RoHSREACHDeclaration
Ethernet FMC 1.8V
OP031-1V8
Serial 312410 to 312539 Compliant with exemption
Annex III exemptions: 6(c)
Article 33: Contains a substance of very high concern at or above 0.1 % w/w in an article (Lead (CAS 7439-92-1))
Candidate List of 2026-02-04, 253 entries, checked 2026-09-10
Annex XVII: No restricted substance in a use that meets a condition of restriction
MCD-OP031-1V8-20260910
Issued 2026-09-10, PDF
Robust Ethernet FMC 1.8V
OP041-1V8
Serial 410880 to 410929 Compliant with exemption
Annex III exemptions: 6(c), 7(c)-I
Article 33: Contains a substance of very high concern at or above 0.1 % w/w in an article (Lead (CAS 7439-92-1))
Candidate List of 2026-02-04, 253 entries, checked 2026-09-10
Annex XVII: No restricted substance in a use that meets a condition of restriction
MCD-OP041-1V8-20260910
Issued 2026-09-10, PDF

If a product is not in the table, we have not published a declaration for it yet. That is not a statement either way about its compliance.

The supporting documents behind each declaration, such as component manufacturers’ declarations and laboratory test reports, are held on file and can be provided on request, subject to any confidentiality terms of the issuing manufacturer. To ask for them, or to ask about a product that is not listed, please use our contact form and include the part number and, if you have it, the serial number of the board.